Welcome to Microsoft's Windows Vista Business Edition
Parallel install guide step
by step. This guide will show you how to Parallel install
Windows Vista. This Parallel install guide is fully graphical and will take you through each step of
What you will require to do this walkthrough is
A Windows Vista Business Edition CD or DVD
A Computer with CD-ROM or DVD-ROM access
Bios set to boot of the CD/DVD-ROM drive. ( Check
out this guide for help with the BIOS )
A second partition or second hard drive installed on
To start this Windows install insert the first CD or the DVD
into the drive and start or restart your computer
The following screen will now appear to "Press any Key
to boot from CD or DVD..", press the space bar on your keyboard to
follow this option (Or any other key that takes your desire)
Windows will load files, this may take some time so
The Windows Vista install will the begin to load.
Some of these stages can take quite sometime so be patient.
Now select your install Language,
Time and Currency Format,
plus keyboard type, once you are happy with the settings,
Click on "NEXT" to continue.
From the next screen click on "Install Now" to
Windows will begin to carry out some processes.
This section is the collecting information part. First you
will need your Windows "Product Key". This will be on the disk
packaging provided with your CD's/DVD's. The product key will be 25 digits
long and will contain letters and numbers.
Input key (Dashes will be added automatically), and
click next when completed.
Now the License terms: Read and confirm that you accept the
License by selecting the box on the bottom left of the screen.
Once done click next to continue.
Now you will asked the type of installation you wish to do.
Click on "Custom" to continue.
Next you will select the location of the previous install.
Disk 0, Partition 1 in our example below. You will also see a 2nd choice,
"disk 0 Unallocated Space" in our example, it could also be "Disk 0
Partition 2" (If drive is setup) or "Disk 1 Partition 1" (For secondary hard
drive), etc etc. Be warned that if you select the drive your previous
install is on you will loose all data from your previous Windows
installation. Also the drive you choose will be formatted too with complete
loss of data on it.
Now select the partition you want to put another version of
Select "Drive Options".....
From the new menu that appears select "NEW".. (If
the drive has already been setup, then click on "DELETE" first (Warning: all
data will be lost)) to use maximum space select drive and click on "NEXT".
Input amount of space to use for new drive/partition,
(default is maximum available), then click "APPLY"
Vista will take a moment to configure the drive...
The drive is now setup, click on "FORMAT"....
You will be warned that all information will be deleted,
click OK to confirm that you are comfortable loosing such data.
Your drive will now format, this may take a moment so be
The drive is now configured, click "NEXT" to continue...
This section is for installing Windows, it will take
sometime and does not require any input from you, so go make a cup of tea or
watch TV as it may take up to an hour. Make sure there are no disks in your
floppy drive, as the computer will reboot a few times during this process.
Windows now copies files:
Windows expands the files:
Windows is installing features:
Windows is installing updates:
Windows is doing a restart: It will do this automatically if
you are not about, otherwise you can click "Restart Now" to speedthings
The computer reboots:
If you get this message then you have left the a floppy disk
in the floppy drive or your harddrive is not in the BIOS boot sequence
correctly. Remove disk or fix BIOS then press "Any Key" to
You may also get this message "Press any key to boot
from CD or DVD..", do not press and key and allow this to pass.
Windows continues Loading:
Windows is now booting for the first time, don't be fooled
there could still be a few reboots and quite a bit of installing to go.
Windows continues to install:
Windows does more updating and installing:
Windows reboots a few more times:
and then finally:
Something to do.
Next Input your Username for the computers Administrator
account. Then Click on Password.
Now input your password (One you will remember) and then
retype the password to confirm. Also type in a password hint that would help
you remember it just in case. You may also change the default local login
image by clicking on a different picture.
If you change the image it will change as per below. Once done click "NEXT" to
Now choose a computer name (Mainly used for ID on a
network), and select a different background image if you wish.
If you change the background it will change as per
below. Click "NEXT" to continue.
Next you need to check the time zone is correct and also the
time and date. Time and date in from the BIOS, but "Time Zone"
needs to be set, it will defaulted to the most common language location used
by your default language as set earlier. Click the "Down arrow" at the end of the box.
Now select your "Time Zone". Once you are happy
with your selection click on "NEXT" to continue
Now select your Windows protection method. We recommend the
top option "Use Recommended settings", click on your selection to
That is all the information gathered that is needed, Windows
Install will thank you, click on "START" to continue....
and begin to load.
Now the Windows "LOGIN" screen. Type in your password and click on the arrow (Or press
"ENTER") to continue.
Windows "WELCOMES" you....
Windows now "PREPARES THE DESKTOP"
Windows desktop appears and the stages of the install begin.
Several personalised settings will be installed.
The desktop will soon appear.
It is time to check your drivers and install all other
software that you will require.
TIP: Usually running "Windows Update" will install most if
not all missing drivers